RPVC Products

FLOWKEM RPVC FITTINGS

Flowkem Rpvc fittings are PVC moulded fittings manufactured for use in pressure water applications like agriculture and irrigation. Flowkem Rpvc fittings conform to IS:7834.

Flowkem Rpvc fittings are available in sizes 20mm (1/2") to 200mm (8").

Fittings

Features

Corrosion Free

Cost Effective

Easy Installation

Maintenance Free

Can Withstand Pressure

Technical Specification

Pressure & Non-Pressure Pipes are manufactured in accordance to IS 4985 covering a complete range from 20 mm to 200 mm. They are available in pressure rating 2.5kg/cm2, 4kg/cm2, 6kg/cm2 & 10kg/cm2. The pipes are provided with plain socket and suitable for solvent cement jointing. Their main application is in agriculture for water supply, drip irrigation & sprinkler lines, etc. as well as for drinking water distribution. However, these can also be used in cable ducting, ventilation pipe line & slurry lines, etc. They are available in light grey colour with nominal length 6mtrs.

Specifications Details
Material Unplasticized Polyvinyl Chloride
Colour Grey
Reference Standards IS - 7834
Working Temperature Up to - 60°C -Continuous
Up to - 90°C - Short time - up to 3 mins.
Test Tested for potable water supply as per IS 7834
Working Pressure Available in 16Kg/cm2, 10Kg/cm2, 6Kg/cm2, 4Kg/cm2
ISI Marked Fitting Pressure rating of the fitting is mentioned on each fitting.
LW & Flowline For Non Pressure application
Non ISI Marked Fitting Refer our technical Specification Chart.
F